Mabotech EA113 DI injectors with harness for V8 twinturbo

$1,999.99

Mabotech labs EA113 Fuel injectors with EA888 harness adapters are a must have for any enthusiast that wishes to unleash the power of their vehicle without loosing efficiency and/or retaining a stock look. They avoid the flowrate difference of intake manifold airflow making them a much better option vs indirect port supplementation.

The Mabotech Labs EA113 fuel injectors with EA888 harness adapters are a must have solution for any enthusiast that wishes to unleash the power of their vehicle without compromising it.

This upgrade increases output by 30-40% with a direct pulse inside the combustion chamber, contrary to indirect PFI/WMI which sprays outside the intake manifold plenum, this solution avoids this serious airflow discrepancy between cylinders. In the stock tune with OEM injectors there are already provisions that can go as low as -14.8% to +13.3% that’s a 28.1% swing between the highest and lowest under different runners and load levels. This is on OEM settings up to 180% VE, once this is further tuned, boost/load increased, etc. The discrepancies can extend exponentially to considerable levels.

We advise to not use more than 20% of indirect port supplementation either pfi, wmi or a combination of both, also aimed to keep Di usage optimized.

-Improves fuel flow by up to +40% (range dependent) 
-Multi-point dynamic set matching
-EA888 plug adapters included
-Full E85 compatible
-Flow matched and set electronically balanced
-Excellent spray pattern and atomization for optimized tuning without compromises
-No head modification required

As with all products there are risks involved in using performance products, we run several stages of testing to make sure the injectors have a constant performance and even higher than stock reliability with that said we are not responsible for any damage or expenses that may incur directly or indirectly related to any of our products.

For all EA113 engines, other engines may also be compatible with harness adapter and/or minor modifications.

Price is for a set of 8 pcs but other combinations can be accommodated if requests are made.

Compare

All products have associated risks especially when paired with other components used at a higher level than their rated capacity, these are not just in using performance products but also increasing the output of a designed setup. We run several stages of testing to make sure the injectors have a constant performance and even higher than stock reliability with that said we are not responsible for any damage that may incur directly or indirectly related to any of our products.

Initial gasoline KRKATE values could range from 0.017000 to 0.021000 +/- depending on set flowrate, setup air capacity (flow and velocity), fuel type and dynamic of the setup. full calibration of injection correction setpoints is further required for perfect operation as with all setups including those with OEM stock injectors.

  1. We offer 6 months warranty if our products become faulty.
  2. We may provide some assistance for certain problem solving situations that present themselves, but the resolution should be followed within the above set timeframe and it is to be covered by the client. No labor expenses are to be covered by Mabotech under any circumstance.
  3. We are NOT responsible for any damage, injury or inconveniences believed to be related directly or indirectly to our parts or services.
  4. Due to the nature of the process installing injectors not originally intended for the v8 engine, ALL expenses including (fuel, wearable parts, labor, etc) are 100% the responsibility of the client.
  5. These injectors require a new installation kit such as the 06D998907.
  6. On some setups it may be good to start with hotter range plugs until calibration is adjusted.
  7. Given the complexity of installation of these injectors on the V8 platform (full engine removal, adjustments, etc), although we run a series of tests prior to shipping we welcome independent professional injector testing before installing them.
  8. Returns must be Pre-approved and ONLY for items still brand new in their original packaging, NO shipping costs will be refunded and a restocking fee may be applied.

We are not responsible for outside tuner’s inability to tune them or calibrate them to satisfactory ranges or installation issues. We are NOT responsible for any damage that may incur directly or indirectly related to any of our products.

Based on 0 reviews

0.00 Overall
0%
0%
0%
0%
0%
Be the first to review “Mabotech EA113 DI injectors with harness for V8 twinturbo”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

SKU: MBTFDIEA113-1 Category:
Navigation

My Cart

Close
Viewed

Recently Viewed

Close

Quickview

Close

Categories